Product Description
HDPE has the very good performance, especially the insulation dielectric strength is high, so that it is very suitable for wire and cable,Medium to high molecular weight grades has excellent impact resistance.
General purpose and industrial purpose,bottle,box; Agricultural irrigation pipe, hot water pipe; Burried drainage pipe; PE pipe; Injection molding.Hostalen 23050 B is a high density polyethylene (HDPE) in nature color, with high melt viscosity for extrusion, injection and compression moulding.
Specification
|
Performance of the project
|
Test condition [condition]
|
The test method
|
The test data
|
The data unit
|
|
|
Density mass index
|
|
GB/T 1033
|
0.948±0.002
|
g/cm3
|
|
Density test results
|
|
GB/T 1033
|
0.948
|
g/cm4
|
|
Melt flow rate mass index
|
190ºC/5.0kg
|
GB/T 3682
|
0.23±0.03
|
g/10min
|
|
Melt flow rate test results
|
|
GB/T 3682
|
0.25
|
g/10min
|
|
Melt flow rate mass index
|
190ºC/21.6kg
|
GB/T 3682
|
6.2±1.5
|
g/10min
|
|
Melt flow rate test results
|
|
GB/T 3682
|
6.4
|
g/10min
|
|
Mechanical properties of
|
Tensile yield strength quality index
|
|
GB/T 1040
|
≥23
|
MPa
|
|
Test results of tensile yield strength
|
|
GB/T 1040
|
27.6
|
MPa
|
|
Elongation at break quality index
|
|
GB/T 1040
|
≥600
|
%
|
|
Test results of elongation at break
|
|
GB/T 1040
|
804
|
%
|
|
Quality index of impact strength of simply supported beam
|
|
GB/T 1043
|
≥25
|
KJ/m2
|
|
Test results of impact strength of simply supported beam
|
|
GB/T 1043
|
26.7
|
KJ/m2
|
|
Other properties
|
Volatile matter quality index
|
|
GB/T 15658 1
|
≤350
|
mg/kg
|
|
Volatile test results
|
|
GB/T 15658 1
|
Did not check out
|
mg/kg
|
|
Biochemical property
|
Cleanliness (color granule) quality index
|
|
SH/T 1541
|
≤20
|
grain/kg
|
|
Cleanliness (color particle) test results
|
|
SH/T 1541
|
0
|
grain/kg
|
|
Cleanliness (impurities) quality index
|
|
SH/T 1541
|
≤60
|
grain/kg
|
|
Cleanliness (impurities) test results
|
|
SH/T 1541
|
0
|
grain/kg
|
Application
1.HDPE film grade is widely used in the production of packing bag, film and so on.
2.Blow molding grade for making various bottles, cans, tanks , barrels Injection-molding grade is for making food cases, plastic trays, goods containers.
3.Blow film product:Foodstuff packing bag,groceries shopping bags, chemical fertilizer lined with film, etc
4.Extruded product: Pipe,tube mainly used in gas transportation, public water and chemicals transport, such as building materials,
gas pipe, hot water drain pipe etc: sheet material is mainly used in the seat, suitcase, handling containers.
Packaging & Shipping
|
