Product Description
ABS is a terpolymer of three monomers: acrylonitrileA), butadiene (B) and styrene (S). The relative content of the three monomers can be changed at will to make various resins. ABS plastic has the common properties of three components. A makes it resistant to chemical corrosion, heat resistance, and has a certain surface hardness, B makes it have high elasticity and toughness, and S makes it have the processing and molding characteristic of thermoplastics and improve electrical properties. performance. Therefore, ABS plastic is a kind of "tough, hard and rigid" material with easy-to-obtain raw materials, good comprehensive performance, low price and wide range of uses.
Properties:
1.Stable shrinkage, good dimensional stability, low warpage
2.Good processability
3.Balance mechanical properties
4.Good exterior, no need to be plated, sprayed
5.Flame resistant
| Properties |
Test Method |
Test Condition |
Units |
Typical Values |
| Physical |
| Melt Flow Rate |
ASTM D-1238 |
220oC, 10Kg |
g/10min |
- |
| Specific Gravity |
ASTM D-792 |
23oC |
g/cm3 |
1.03 |
| Ash |
- |
800oC,30min |
% |
- |
| Mechanical |
| Tensile Strength |
ASTM D-638 |
50mm/min |
MPa |
46 |
| Elongation at Break |
ASTM D-638 |
50mm/min |
% |
14 |
| Flexural Strength |
ASTM D-790 |
2mm/min |
MPa |
62 |
| Flexural Modulus |
ASTM D-790 |
2mm/min |
MPa |
1800 |
| Impact Strength, IZOD non-notched |
ASTM D-256 |
23oC |
KJ/m2 |
- |
| |
|
-30oC |
KJ/m2 |
- |
| Impact Strength, IZOD notched |
ASTM D-256 |
23oC |
KJ/m2 |
17 |
| |
|
-30oC |
KJ/m2 |
- |
| Thermal |
Heat Deflection Temp. |
ASTM D-648 |
1.8Mpa |
oC |
93 |
| |
|
0.45Mpa |
oC |
98 |
| Others |
| Mold Shrinkage |
ASTM D-955 |
23oC |
% |
0.6-0.9 |
| Flammability |
UL94 |
1/16" |
|
HB |
Tip: The technical data sheet is for reference only. We supply the OEM service per your request. |
